Command: devicehigh
DEVICEHIGH loads a driver into high memory,whereas DEVICE loads the
driver into low or conventional memory.
DEVICEHIGH is a CONFIG.SYS / FDCONFIG.SYS command.
Syntax:
devicehigh=[drive][path]filename [options]
drive The drive letter, e.g. C:
path The directory, e.g. \example\
filename The driver (file) to load, e.g. himemx.exe
Options:
options These are options to the driver
program, not to the 'device' command.
Comments:
DEVICEHIGH loads the device driver specified by drive:\path\filename
into high [ABOVE 640KB] memory (failing that it should load it in
conventional memory). The options are for the driver itself; refer to
documentation that came with your particular device for supported
options and their usage.
As DEVICEHIGH loads the driver into high memory there remains more
free space in low or conventional memory for other drivers or for
programs.
To load up a driver or a program into high memory you first have to
load a driver like (HIMEM), HIMEMX or JEMMEX in CONFIG.SYS /
FDCONFIG.SYS.
DEVICEHIGH is a command internal to kernel.sys and needs no other
file in order to work.
Examples:
IN CONFIG.SYS / FDCONFIG.SYS:
DEVICE=C:\FDOS\BIN\XMGR.SYS /N128 /B
DEVICEHIGH=C:\FDOS\DRIVERS\UIDE.SYS /S125 /D:MYDVD
WITHIN A MENU:
23?DEVICEHIGH=C:\FDOS\BIN\XMGR.SYS /N128 /B
23?DEVICEHIGH=C:\FDOS\DRIVERS\UIDE.SYS /S125 /D:MYDVD
See also:
config.sys
device
fdconfig.sys
(fdxms)
(fdxms286)
(himem)
himemx
jemmex
Copyright © 1998 Jim Hall, updated 2011 by W. Spiegl.
This file is derived from the FreeDOS Spec Command HOWTO.
See the file H2Cpying for copying conditions.