Command: devicehigh

  DEVICEHIGH loads a driver into high memory,whereas DEVICE loads the 
  driver into low or conventional memory.
  DEVICEHIGH is a CONFIG.SYS / FDCONFIG.SYS command.

Syntax:

  devicehigh=[drive][path]filename [options]
             drive     The drive letter, e.g. C:
             path      The directory, e.g. \example\
             filename  The driver (file) to load, e.g. himemx.exe

Options:

  options  These are options to the driver 
           program, not to the 'device' command.

Comments:

  DEVICEHIGH loads the device driver specified by drive:\path\filename
  into high [ABOVE 640KB] memory (failing that it should load it in
  conventional memory). The options are for the driver itself; refer to
  documentation that came with your particular device for supported
  options and their usage.
  As DEVICEHIGH loads the driver into high memory there remains more
  free space in low or conventional memory for other drivers or for
  programs.
  To load up a driver or a program into high memory you first have to
  load a driver like (HIMEM), HIMEMX or JEMMEX in CONFIG.SYS /
  FDCONFIG.SYS.
  DEVICEHIGH is a command internal to kernel.sys and needs no other
  file in order to work.

Examples:

  IN CONFIG.SYS / FDCONFIG.SYS:
    DEVICE=C:\FDOS\BIN\XMGR.SYS /N128 /B
    DEVICEHIGH=C:\FDOS\DRIVERS\UIDE.SYS /S125 /D:MYDVD
  WITHIN A MENU:
    23?DEVICEHIGH=C:\FDOS\BIN\XMGR.SYS /N128 /B
    23?DEVICEHIGH=C:\FDOS\DRIVERS\UIDE.SYS /S125 /D:MYDVD

See also:

  config.sys
  device
  fdconfig.sys
 (fdxms)
 (fdxms286)
 (himem)
  himemx
  jemmex

  Copyright © 1998 Jim Hall, updated 2011 by W. Spiegl.

  This file is derived from the FreeDOS Spec Command HOWTO.
  See the file H2Cpying for copying conditions.