Command: himemx

  HIMEMX is the High Memory Manager.
  HIMEMX has to be loaded in CONFIG.SYS / FDCONFIG.SYS.

Syntax:

  HIMEMX [/MAX=####] [/METHOD:xxx] [/HMAMIN=n] [/NUMHANDLES=m]
        [/TESTMEM:ON|OFF] [/VERBOSE] [/NOABOVE16] [/X] [/LOG]

Options:

  /MAX=#####       Limit memory controlled by XMM to #####K.
  /METHOD:xxx      Specifies the method to be used for A20 handling.
                   Possible values for xxx:
                   ALWAYSON    Assume that A20 line is permanently ON
                   BIOS        Use BIOS to toggle the A20 line
                   FAST        Use port 92h, bypass INT 15h test
                   PS2         Use port 92h, bypass PS/2 test
                   KBC         Use the keyboard controller
                   PORT92      Use port 92h always
  /HMAMIN=n        Specifies minimum number of Kbs of HMA that a program
                   must request to gain access to the HMA (default: 0Kb).
  /NOX2MAX32       No limit for XMS 2.0 free/available memory reports
                   (default).
  /NUMHANDLES=m    Specifies number of XMS handles available (def: 48).
  /TESTMEM:ON|OFF  Performs or skips an extended memory test (def: OFF).
  /VERBOSE         Gives extra information during installation.
  /NOABOVE16       Do not use INT 15h function E801h to detect >64M.
  /X               Do not use INT 15h function E820h to detect >64M..
  /X2MAX32         Limit XMS 2.0 free/avail. memory report to 32M-1K
  /LOG             Logs the driver activity to the screen.
  /?               Shows the help.

Comments:

  HIMEMX requires a 80386+ CPU. JEMM386 can be loaded after this 
  driver. Load HIMEMX as DEVICE=HIMEMX.EXE in CONFIG.SYS (although
  it is an ".exe"-file!

Examples:

  IN CONFIG.SYS / FDCONFIG.SYS:
    device=c:\fdos\bin\himemx.exe
    device=c:\fdos\bin\jemm386.exe

Command: himemx

Syntax:

Options:

Comments:

Examples:

See also: