Command: lbacache

  LBACACHE is a hard disk cache program. Improves drive performance.
  It requires XMS memory, and at least a 386 computer.


  To load:      LBACACHE  [size] [DRV drivelist] [FLOP] [TUNA] [TUNW]
  When loaded:  LBACACHE  [INFO] [SYNC] [STOP] [STAT] [ZERO]
  To get help:  LBACACHE  HELP|/HELP|/?

[Main menu] [top] (Syntax) [Options] [Comments] [Examples] [See also] [File]


  size      Specifies the buffer size. Default: 2048k. If 1-2 digits, unit
            is 256k (in XMS), so default is to use 2 MB XMS. If > 2 digits,
            unit is simply 1 kilobyte. Example: 'LBACACHE 8192'. Other
            possible syntax: "BUF size" instead of "size".
  FLOP      Enable the floppy cache (A: and B:, autodetected). To speed up
            floppy use, load TICKLE, too! Please report if FLOP has bugs.
            A bug can e.g. mean that the cache makes wrong assumptions on
            floppy geometry which can lead to data corruption on the disk
            or in files copied from disk. If you only use 1.44 MB disks
            in an 1.44 MB drive, bugs are extremely unlikely, though...
  DRV list  Selects which harddisks are cached. No discs are cached by
            using the keyword NULL.
            It is strongly recommended to let LBAcache autodetect all
            cacheable harddisks instead of using this option!
            List consists of digits in 0..7, for BIOS drives 80h+x. E.g.:
            023   caches BIOS drives 80h, 82h, 83h - first, third and
                  fourth harddisk (hda, hdc, hdd in Linux terminology).
            Important: First BIOS harddisk means ALL drive letters which
            are on the first physical harddisk.
  TUNA      Fully associative cache: Search whole cache for a sector or
            for free space in worst case. Slower for big caches but can
            give more cache hits than the new (6/2004) default of searching
            only up to N (current setting: 16) cache elements (current size
            of an element: 8kB).
            First tests suggest: slightly more cache hits but lower speed!
  TUNW      Allocate on write: When data is written to disk, store a copy
            in cache, EVEN if that means allocating new space in cache, in
            anticipation of reading the data back later. Was the default
            until 7/2004. Makes writes "consume" more cache, but is useful
            for tasks which work with temp files a lot. If data was cached
            anyway, the copy in cache is updated regardless of this option.
  TUNS      Allocate 320 bytes of low DOS RAM for stacks (new 7/2004). Use
            this option if you want to load LBAcache into JEMM386's UMB or
            otherwise "not very DMA friendly UMB" and have a SCSI system.
            SCSI BIOSes seem to use DMA to stack for geometry check calls!
            Note that this memory is *not* freed by LBAcache STOP, as the
            unloading protocol would have to be changed too much for that.
NON-LOAD options:
  INFO      Shows cache statistics and details about resident LBAcaches.
            Useful for debugging purposes, but somehow hard to understand.
  STAT      Shows easier to understand cache statistics only.
  ZERO      Reset the cache statistics counters to zero.
  SYNC      Synchronizes all running LBAcache buffers for all drives. As
            LBAcache never delays writes, SYNC is just forget cached data.
            This is done by calling int 13.46 (BIOS disk: eject) for all
            cacheable drives (0, 1, 0x80 .. 0x87). It is recommeded to do
            LBACACHE ZERO after LBACACHE SYNC, will make the statistics
            more intuitive to read.
  STOP      Shuts down all running LBAcache instances and frees the XMS
            and DOS RAM which they had allocated (removes them from RAM).
            If the interrupt chain cannot be restored, LBAcache instances
            are left in DOS RAM, but at a reduced size of < 500 bytes.
            The XMS memory is always freed. When a single LBAcache is
            loaded as last disk related resident program, complete unload
            should work most of the time. When loading several LBAcache
            instances, often only the last instance can be fully unloaded.
  COOL      Puts the cache into "cool" mode: accessed sectors are frozen
            into the cache (as much as possible - use TUNA to enhance the
            effect). See the BINSEL explanations to find out whether this
            experimental (9/2004) mode is useful for you.
  WARM      Puts the cache into "melt" mode: accessed sectors are
            unfrozen (defrosted? :-)) from the cache. See above. (9/2004)
            Note: WARM, COOL and TEMP all display a diagnostic status
            value for debugging, e.g. the current "locked element count".
            After that, the normal STAT output is shown.
  TEMP      Restores the cache to "normal temperature" mode: The frozen-
            ness state of the current contents is preserved as far as
            possible (if the cache gets really full, things will melt).
            Now you have reserved part of the cache for frozen / locked
            data and the rest of the cache space in classic mode. (9/2004)

[Main menu] [top] [Syntax] (Options) [Comments] [Examples] [See also] [File]


  For further information see lbacache.txt.

[Main menu] [top] [Syntax] [Options] (Comments) [Examples] [See also] [File]


    INSTALL=LBACACHE.COM [arguments]
  or from command line or AUTOEXEC.BAT:
    LBACACHE [arguments]

    LBACACHE              Just running the command without options will
                          read cache all your hard disks (if available
                          through the BIOS) with the default cache buffer
    LBACACHE buf 20 flop  This will read cache all hard disks and floppy
                          disks, with 5MB of memory for the cache buffer. 
    LBACACHE info         Shows information about your caches. 

[Main menu] [top] [Syntax] [Options] [Comments] (Examples) [See also] [File]

See also:


[Main menu] [top] [Syntax] [Options] [Comments] [Examples] (See also) [File]


  Please read this command's lsm file also.
  You will find the updated version (internet) here and
  the version described in this manual page here.
  The lsm file contains information about the name of the programmer,
  the download site, and some other command related information.

[Main menu] [top] [Syntax] [Options] [Comments] [Examples] [See also] (File)

  Copyright © 2004 Robert Platt, updated 2011 by W. Spiegl.

  This file is derived from the FreeDOS Spec Command HOWTO.
  See the file H2Cpying for copying conditions.